EOY Clearance! All Stratasys Compatible Products now 50% off with FREE shipping.
Discounts applied at checkout.

Exchange & refurbishment service

Just send in your worn or damaged PSA upper frames and we will exchange or refurbish with a fresh pre stretched foil membrane. Please note this service requires shipping on the frames back to EnvisionTEC in Germany so if we don't have an exchange PSA in stock please allow 6 - 8 weeks turnaround time.

Please pay attention that the PSAs are cleaned prior to return. During the transport remains of resin can be harden, which makes the exchange more difficult, because often the screws are also affected.

The PSA (Pre-Stretched Assembly) basement comprises two components: The upper part consists of stretched film fitted between a frame. The film is highly flexible and allows for an easy and fast build part separation and thus for a faster building process than with the non-flexible Standard or M-Type basement.

Please note that the upper part of the PSA basement is a consumable that has to be replaced if it is scratched or otherwise damaged. The bottom part consists of a glass plate which is separated from the upper part by a separation foil. The bottom part of the PSA basement usually does not have to be exchanged. It is delivered as a Standard or High Border type, the latter of which is used for machines with large build platforms. Like the M-Type, it can be used with all envisionTEC® photopolymers.

(ENV920-0003)

SKU ENV920-0003
Brand EnvisionTEC
Shipping Weight 0.8000kg
Shipping Width 0.320m
Shipping Height 0.700m
Shipping Length 0.240m

Be The First To Review This Product!

Help other EVOK3D users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Epsom Salt 22-16743

Epsom Salt 22-16743

For Salt Water Infiltration

Normally  $10.05 Ex GST
Now  $5.03 Ex GST
On Sale
Scraper Blade ProJet 260C / 460Plus (ZPrinter 250/450) 22-30578

Scraper Blade ProJet 260C / 460Plus (ZPrinter 250/450) 22-30578

Scraper Blade ProJet 260C / 460Plus (ZPrinter 250/450) 22-30578

Normally  $6.34 Ex GST
Now  $3.17 Ex GST
On Sale
Stratasys® SR10 aka P400SR alternative - 922cc - Chip & Grey Break Away Spool

Stratasys® SR10 aka P400SR alternative - 922cc - Chip & Grey Break Away Spool

Includes Replacement filament spool & EEPROM chip for Re-Use & Re-Filling of Stratasys® FDM® cassettes This break away support material can be used as an refill / alternative

Normally  $390.67 Ex GST
Now  $195.34 Ex GST
On Sale

More From This Category

Perfactory P4 PSA Standard - P11-KGB05F-02

Perfactory P4 PSA Standard - P11-KGB05F-02

Upper part basement with foil

$1,057.80 Ex GST
$1,057.80 Ex GST
Plug-in UV flash module

Plug-in UV flash module

Replacement flash tube unit 1 off replacement flash tube unit suitable for Otoflash G171-2 and G171-6 includes: 2 off flash bulbs 1 off reflector 2 off built

$860.99 Ex GST
$860.99 Ex GST
Air filter

Air filter

Air filter for Otoflash G171. This is the mesh filter that goes in front of the flashing chamber. Recommendation: The filter should regularly gently be blown out by means of compressed ai

$4.39 Ex GST
$4.39 Ex GST
Acrylic glass tray for Otoflash 360-700 nm

Acrylic glass tray for Otoflash 360-700 nm

Acrylic glass tray for Otoflash allowing light transmission between 360-700 nm. Tray type 360N2: with UVB-block, light < 360 nm is blocked Recommended for post curing most UV cura

$190.35 Ex GST
$190.35 Ex GST
Power transformer

Power transformer

Power transformer for Otoflash G171

$553.53 Ex GST
$553.53 Ex GST
Flash PCB

Flash PCB

Flash PCB for Otoflash G171. This controls the flasher unit.

$841.02 Ex GST
$841.02 Ex GST
Otoflash G171-6 with nitrogen attachment (for CE: hearing and dental)

Otoflash G171-6 with nitrogen attachment (for CE: hearing and dental)

Otoflash Post Curing Light Pulsing Unit With Nitrogen attachement for CE requirements like hearing aids and dental The Otoflash is a light polymerization chamber for the har

$4,395.00

Ex GST
Otoflash G171-2

Otoflash G171-2

Otoflash Post Curing Light Pulsing Unit The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications.

$4,137.17 Ex GST
$4,137.17 Ex GST