Choose the correct Perfboard version to suit your 3D Printer:

  • UP Mini (14x14cm black perfboard)
  • UP Plus (14x14cm black perfboard)
  • UP Plus 2 (14x14cm black perfboard with extended cutout for auto platform height sensor)
  • UP Box is the biggest - you'll know if this is the one you need.


Every UP printer comes with 3 perfboards originally
To clean your perfboard just use the scrapper and scrape both sides smooth. You dont need to clean the plastic in the holes.

If you find printed parts are not sticking, wipe the perfboard with Acetone.

(UPP007)

SKU UPP007
Brand Tiertime

UP Mini perfboard

By: on 18 May 2018
The delivery took around a month and the boards were smaller than the build area of the printer being about 5cm shorter than the original boards. The price of the boards however was fair but offset by the most expensive freight costs of anywhere in the world at around $20. Before that the record was about $7 from QLD, $4.50 from the US, $1.50 from China. My fault though. I only live a couple of suburbs away from evok3D and should have picked it up from the store myself.
(1)

Write a product review

Others Also Bought

Extruder Block Assembly V3 - 8mm nozzle

Extruder Block Assembly V3 - 8mm nozzle

This connects under the main extruder head and heats up to 260 degrees, includes nozzle. Highly recommended to have a spare one. Since the UP 3D Printers first started produ

$111.99

Ex GST
40mm Fan

40mm Fan

40mm fan that cools the extruder head. If your Up! has a 35mm fan you can print an new 40mm fan shroud in this section:

$19.62

Ex GST

More From This Category

Nozzle Drill Bits (10 pack)

Nozzle Drill Bits (10 pack)

10 pack of nozzle cleaning hand drill bits 0.4mm. To be used by hand to clean out your nozzle. Always do a withdraw

$27.26

Ex GST
UP Stepper Motor

UP Stepper Motor

4 pin stepper motor suitable for the UP! range of 3D Printers. If one (or more) of yours is causing wonky prints, goes one way but not the other or has simply kicked the bucket, here's your replace

$49.00

Ex GST
HEPA filter for UP BOX - replace every 6 months

HEPA filter for UP BOX - replace every 6 months

$29.76

Ex GST
40mm Fan

40mm Fan

40mm fan that cools the extruder head. If your Up! has a 35mm fan you can print an new 40mm fan shroud in this section:

$19.62

Ex GST
Extruder Block Assembly V3 - 8mm nozzle

Extruder Block Assembly V3 - 8mm nozzle

This connects under the main extruder head and heats up to 260 degrees, includes nozzle. Highly recommended to have a spare one. Since the UP 3D Printers first started produ

$111.99

Ex GST