4 pin stepper motor suitable for the UP! range of 3D Printers. If you are getting inconsistent filament flow or you extruder motor has given in, this is the replacement you need.

This is for the extruder head. If you need a replacement x, y or z axis motor (same motor for each axis) look here

(UPSM02)

SKU UPSM02
Brand Tiertime
Shipping Weight 0.2000kg

Perfect!

14 December 2015
Super easy to replace and the shipping time was awesome. Fixed the problems I had and was back to printing in no time!
(5)

Write a product review

Others Also Bought

UP+2 Platform Heater FFC Cable

UP+2 Platform Heater FFC Cable

Thin white flexible cable that goes in the X axis arm of newer UP+2 printers. It connects to the platform heater PCB under the build platform.

Nozzle Drill Bits (10 pack)

Nozzle Drill Bits (10 pack)

10 pack of nozzle cleaning hand drill bits 0.4mm. To be used by hand to clean out your nozzle. Always do a withdraw

3D Printer Tool Kit

3D Printer Tool Kit

This 3D Printer Tooling Bundle is specifically loaded with all the tools you need for maintaining your 3D printer

Extruder Block Assembly V3 - 8mm nozzle

Extruder Block Assembly V3 - 8mm nozzle

This connects under the main extruder head and heats up to 260 degrees, includes nozzle. Highly recommended to have a spare one. Since the UP 3D Printers first started produ

40mm Fan

40mm Fan

40mm fan that cools the extruder head. If your Up! has a 35mm fan you can print an new 40mm fan shroud in this section:

HEPA filter for UP BOX - replace every 6 months

HEPA filter for UP BOX - replace every 6 months

UP Plus & Plus 2 Heater Table Thumb Screw (1 off)

UP Plus & Plus 2 Heater Table Thumb Screw (1 off)

Up Plus & Plus 2 Heater Table Thumb Screw (1 off) There are 3 required in total if you need to replace all of them

More From This Category

Up! Box FFC Converter / BC0076

Up! Box FFC Converter / BC0076

Up! Box FFC Converter / BC0076

Up! Box FFC transition board / BC0079

Up! Box FFC transition board / BC0079

HEPA filter for UP BOX - replace every 6 months

HEPA filter for UP BOX - replace every 6 months

3D Printer Tool Kit

3D Printer Tool Kit

This 3D Printer Tooling Bundle is specifically loaded with all the tools you need for maintaining your 3D printer

Nozzle Drill Bits (10 pack)

Nozzle Drill Bits (10 pack)

10 pack of nozzle cleaning hand drill bits 0.4mm. To be used by hand to clean out your nozzle. Always do a withdraw

UP limit switch

UP limit switch

Replacement limit switch for UP Plus and Plus 2 3D Printer. This assembly has a long cable so is suitable for use on the x, y or z axis.

Auto calbration kit - Auto levelling sensor, Auto height sensor, 3.5mm cable

Auto calbration kit - Auto levelling sensor, Auto height sensor,

40mm Fan

40mm Fan

40mm fan that cools the extruder head. If your Up! has a 35mm fan you can print an new 40mm fan shroud in this section: