The new Platform Suite includes:
  • The new aluminium platform V2 which has extra holes to screw down the perfboard.
  • Perfboard cut at an 45 degree angle
  • 6 x Mini clips
  • Four countersunk M3 screws to hold down the perfboard to the new platform.
  • 3 x long M5 thumb screws 3 x springs to allow manual leveling of the build platform
Note: This kit is included in the UP Plus 3D Printer.

(UPP002)

SKU UPP002
Brand Tiertime
Shipping Weight 0.5000kg
Shipping Width 0.150m
Shipping Height 0.300m
Shipping Length 0.150m

Be The First To Review This Product!

Help other EVOK3D users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

Nozzle Drill Bits (10 pack)

Nozzle Drill Bits (10 pack)

10 pack of nozzle cleaning hand drill bits 0.4mm. To be used by hand to clean out your nozzle. Always do a withdraw

3D Printer Tool Kit

3D Printer Tool Kit

This 3D Printer Tooling Bundle is specifically loaded with all the tools you need for maintaining your 3D printer

Extruder Block Assembly V3 - 8mm nozzle

Extruder Block Assembly V3 - 8mm nozzle

This connects under the main extruder head and heats up to 260 degrees, includes nozzle. Highly recommended to have a spare one. Since the UP 3D Printers first started produ

UP+2 Platform Heater FFC Cable

UP+2 Platform Heater FFC Cable

Thin white flexible cable that goes in the X axis arm of newer UP+2 printers. It connects to the platform heater PCB under the build platform.

UP Extruder Stepper Motor

UP Extruder Stepper Motor

4 pin stepper motor suitable for the UP! range of 3D Printers. If you are getting inconsistent filament flow or you extruder motor has given in, this is the replacement you need.

40mm Fan

40mm Fan

40mm fan that cools the extruder head. If your Up! has a 35mm fan you can print an new 40mm fan shroud in this section:

UP Plus Extruder Mount

UP Plus Extruder Mount

UP Plus 3D Printer Extruder Head Mount for pre July 2012 UP Plus 3D Printers. Not required for newer UP Plus printers. This bracket is more ro

UP Stepper Motor

UP Stepper Motor

4 pin stepper motor suitable for the UP! range of 3D Printers. If one (or more) of yours is causing wonky prints, goes one way but not the other or has simply kicked the bucket, here's your replace