Home > Materials > Stratasys® Compatible Materials

We supply re-fill filament spools to be placed inside your OEM canister or cartridge and takes less than 4 minutes to reload. Each spool comes with a corresponding EEPROM chip (DRD for uPrints) that ensures that the material will run seamlessly in your machine. This Plug & Play method requires no adjustment or recalibration of your system.

These materials are currently being used by over 700 companies such as NIKE, Boeing, Honda and GE, and are the ONLY materials compatible with your Stratasys® machine.

Our prices are 25% to 38% less than the OEM list price which can translate to a direct saving of thousands of dollars per year. Essentially, we’re asking you to RECYCLE and RE-USE your OEM material carrier on each reload.
Note that running 3rd party materials in your FDM printer WILL NOT affect your OEM warranty.

Reuse your Stratasys® canisters
uPrint SE® & SE Plus® Compatible Material uPrint® & uPrint Plus® Compatible Material Dimension 1200® Series Compatible Material
uPrint SE® & SE Plus® Compatible Material
uPrint® & uPrint Plus® Compatible Material
Dimension 1200® Series Compatible Material
Dimension 768® Series Compatible Material Dimension ELITE® & Fortus 250/200® Compatible Material Fortus 900/400/360 MC® Compatible Material
Dimension 768® Series Compatible Material
Fortus 250/200 MC® Compatible Material
Fortus 900/400/360 mc® Compatible Material
Legacy Systems
Legacy Systems - Suitable for Quantum/Maxum, Vantage/Titan and HP DesignJet machines
All trademarks recognized: Stratasys, FDM, FDM Technology, Mojo, Dimension, uPrint, Dimension BST, Dimension SST, WaveWash, Ecoworks, uPrint Plus, uPrint SE, uPrint SE Plus, Fortus, Fortus 200mc, Fortus 250mc, Fortus 360mc, Fortus 400mc, Fortus 900mc, FDM Nylon 12, ABSplus, ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ISO, XTEND, SR-20, SR-30, SR-100 and SR-110 are trademarks of Stratasys Ltd. ULTEM is a registered trademark of SABIC or affiliates.